Understanding the Factory Trigger and Its Potential Limitations
Let’s face it: the out-of-the-box trigger on a Taurus 605 can be a mixed bag. While reliable and capable of functioning, the factory-installed springs often result in a trigger pull that feels heavy and, at times, gritty. The trigger pull weight might feel significantly greater than what the shooter might be used to. This heavier pull, coupled with a potentially long travel distance and reset, can hinder accuracy and slow down follow-up shots. The “stacking” effect, where the trigger pull resistance increases further as it’s pulled, is also a common occurrence, making it more challenging to achieve consistent shot placement.
These characteristics can lead to a less-than-optimal shooting experience. A heavy trigger can cause the shooter to inadvertently pull the gun to one side during the squeeze, compromising accuracy. The long trigger travel and reset can make rapid follow-up shots difficult and the overall experience less enjoyable.
This isn’t to say the factory trigger is inherently “bad,” but it frequently leaves room for improvement. The trigger’s design is often a compromise between safety and performance, with a focus on robustness and preventing accidental discharges. However, with a Taurus 605 Trigger Spring Kit, you can enhance the trigger’s performance without sacrificing the essential safety features of the revolver.
What Exactly Is a Trigger Spring Kit?
At its core, a trigger spring kit is a collection of springs designed to replace the factory-installed springs within a firearm’s trigger mechanism. For the Taurus 605, a typical kit will include, but not always, springs such as the hammer spring (also called the mainspring), and the trigger return spring. Some kits may also contain a firing pin spring, offering an even more complete trigger upgrade.
The hammer spring is responsible for delivering the force needed to ignite the primer of the cartridge. A lighter hammer spring can reduce the trigger pull weight but requires careful consideration. The trigger return spring plays a crucial role in resetting the trigger after each shot and is instrumental in a smooth and responsive trigger pull.
The purpose of a trigger spring kit is straightforward: to optimize the trigger pull characteristics. By replacing the factory springs with springs of a different weight or design, you can achieve a lighter, smoother, and more consistent trigger pull. This, in turn, translates to improved accuracy, reduced felt recoil, and a significantly more pleasant shooting experience.
The differences between using a trigger spring kit vs other modifications are distinct. While other gun modifications may improve the ergonomics or add functionality to the Taurus 605, the trigger spring kit is specifically intended to improve the feel and action of the trigger pull itself. This can be done without compromising any of the original functions of the Taurus 605.
Choosing the Right Trigger Spring Kit for Your Taurus 605
The market offers various trigger spring kits tailored to the Taurus 605. Before making a purchase, it is crucial to research the specific kit. Research the trigger spring kits that are available and compatible with the Taurus 605. Consider the reputation of the manufacturer and what their customers are saying. Consider if you need a lighter trigger pull or if the stock is what you are looking for. The right kit depends on your preferences and shooting needs.
When considering a Taurus 605 Trigger Spring Kit, several factors come into play. The most critical is the desired trigger pull weight. Kits typically offer different spring weights, allowing you to choose a pull that suits your preferences. A lighter trigger pull can make it easier to achieve accurate shots. However, the lighter the trigger pull, the greater the risk of light strikes, especially with certain ammunition types.
Reliability is also a prime consideration. You want a kit that will function consistently and reliably under all conditions. Look for kits from reputable manufacturers with a proven track record. Customer reviews and forum discussions can be valuable resources for gauging the reliability of a particular kit.
A crucial consideration: safety. Never compromise the safety of your firearm. Before installing any trigger spring kit, make sure you know how each spring affects the trigger pull. The safety of a revolver depends on its trigger functioning properly. Always test the firearm thoroughly after installation to ensure the safety mechanisms are operating correctly. Going too light with the hammer spring, for example, could lead to misfires, which are not only inconvenient but can also jeopardize your safety. The trigger spring kit should not compromise the safety of your firearm.
Important Note: Always prioritize safety and ensure your firearm remains safe and functional after any modification. If you’re unsure about any part of the installation process, consult a qualified gunsmith.
A Look at the Installation Process: A Detailed Guide
Disclaimer: *Before proceeding, ensure you have completely unloaded your Taurus 605 and have verified it is safe to handle.* Work in a well-lit area, clear of distractions.
Tools and Materials You’ll Need:
* Trigger Spring Kit specific to the Taurus 605
* A set of gunsmithing screwdrivers (or a well-fitting set of screwdrivers for the Taurus 605)
* A set of punches, including a roll pin punch
* A small hammer
* A clean work surface
* A well-lit area
* Gun grease or lubricant
Step-by-Step Installation Guide:
1. **Disassembly:** Remove the grips from your Taurus 605. The grip screw is usually located on the bottom of the grip. Once removed, the grips will slide off the frame.
2. **Cylinder Release:** Open the cylinder by pressing the cylinder release button.
3. **Removing the Side Plate:** Carefully remove the side plate screws. Use the correct size screwdriver to prevent stripping the screw heads. Gently tap on the side plate to loosen it from the frame, then carefully pry it off. Be careful not to damage the plate.
4. **Removing the Trigger Mechanism:** The trigger mechanism is now exposed. Before removing the trigger mechanism, note the positions of all the springs and levers. Take a photo or make a sketch to help you with reassembly.
5. **Removing the Hammer Spring:** Carefully compress the hammer spring and release it from its mounting. The hammer spring is often the most difficult spring to manage. If you are unfamiliar with this process, take the Taurus 605 to a gunsmith.
6. **Removing the Trigger Return Spring:** Locate and remove the trigger return spring. This is often a small spring located in the frame.
7. **Installing the New Springs:** Install the new springs from the trigger spring kit. Carefully ensure the springs are positioned correctly, based on your notes or photographs taken during disassembly.
8. **Reassembly:** Carefully reassemble the trigger mechanism and the side plate. Make sure the side plate fits flush with the frame.
9. **Re-Gripping:** Attach the grips to your Taurus 605.
Potential Challenges and Solutions:
* Tight Tolerances: Taurus firearms are often made with tight tolerances. Some parts may require a bit of finesse to align during reassembly.
* Spring Orientation: Pay close attention to the orientation of the springs. Incorrect positioning can cause malfunctions.
* Difficult Pins: Some roll pins can be difficult to remove. Use a punch of the correct size and gentle but firm pressure.
Testing the Taurus 605 After Installation
Before live-firing your Taurus 605, it’s vital to perform a thorough function check. Dry-fire the revolver several times. Ensure the trigger functions smoothly, the cylinder rotates correctly, and the hammer cocks and drops reliably.
If you have issues, consider:
* Light Strikes: If your Taurus 605 experiences light strikes, you may have chosen a hammer spring that’s too light.
* Trigger Failure: If the trigger fails to return or doesn’t reset, double-check the installation of the trigger return spring.
* Cylinder Rotation: Test the cylinder rotation. Make sure the cylinder rotates completely and consistently.
The Advantages of Upgrading with a Trigger Spring Kit
Once you’ve installed a Taurus 605 Trigger Spring Kit and properly tested it, the benefits become immediately apparent.
A significantly improved trigger pull is perhaps the most noticeable advantage. The trigger will likely feel lighter, smoother, and more consistent. This enhanced smoothness will allow for better shot placement, especially at longer distances. The removal of the grittiness of the trigger pull gives the shooter greater confidence.
The improved trigger will translate into more accurate shooting. With a lighter, smoother trigger, it becomes easier to maintain a steady sight picture and execute a clean trigger pull. As a result, your groups will likely tighten.
The upgraded trigger also enhances the overall shooting experience. Shooting will be more enjoyable and less fatiguing. This will allow the shooter to practice for longer periods.
Conclusion
A Taurus 605 Trigger Spring Kit is a valuable upgrade that can transform the performance of your revolver. From smoother and lighter trigger pulls to enhanced accuracy and an improved shooting experience, the benefits are clear.
Remember: *Safety always comes first.* Proceed with caution, and if you’re not comfortable with the installation process, seek the assistance of a qualified gunsmith.
A trigger spring kit is an investment in your shooting experience. If you are looking for an upgrade for the Taurus 605, then consider the trigger spring kit. The Taurus 605 Trigger Spring Kit will provide a more enjoyable shooting experience.
